XB Cloidal Pin Wheel Gear Reducer

Short Description:

Cycloidal gear drives are unique and are still unsurpassed where drive technology is concerned. The cycloidal speed reducer is superior to traditional gear mechanisms, since it only operates with rolling force and is not exposed to shear forces. By comparison with gears with contact loads, Cyclo drives are more resistant and can absorb extreme shock loads by means of uniform load distribution over the power transmitting components. Cyclo drives and cyclo drive geared motors are characterized by their reliability, long service life and outstanding efficiency, even under difficult conditions.

Send email to us

Product Detail

Product Tags

Features

1. Large transmission ratio, for single transmission ratio is 1/6-1/87, and for double is 1/99-1/7569
2. High transmission efficiency. The average efficiency is over 90%
3. Small volume, light weight
4. Low noise when operating, less fault, long life, stable and reliable operation, easy disassembly, easy repair.
5.Housing material:HT200 Cast iron
6.Cycloid wheel material:GCr15
7.Input/Output shaft material:#45 High-carbon chromium steel
8.Lubricating oil:GB 2# Lithium grease, Mobilux EP 2
9.Heat Treatment:Tempering,quenching
10.Efficiency:94%~96%
11.Noise (MAX):60~70dB
12.Temp. rise (MAX):60°C
13.Vibration:≤20µm
14.Backlash:≤60Arcmin

Main applied for

- Belt conveyor drives
- Bucket elevator drives
- Agitator drives
- Hoisting gear drives
- Travelling gear drives
- Paper machine drives
- Dryer drives
- Water screw drives

Technical Data

Models	Power	Ratio	Max. Torque	Output Shaft Dia.	Input Shaft Dia.
1 Stage
X2(B0/B12)	0.37~1.5	9~87	150	Φ25(Φ30)	Φ15
X3(B1/B15)	0.55~2.2	9~87	250	Φ35	Φ18
X4(B2/B18)	0.75~4.0	9~87	500	Φ45	Φ22
X5(B3/B22)	1.5~7.5	9~87	1,000	Φ55	Φ30
X6(B4/B27)	2.2~11	9~87	2,000	Φ65(Φ70)	Φ35
X7	3.0~11	9~87	2,700	Φ80	Φ40
X8(B5/B33)	5.5~18.5	9~87	4,500	Φ90	Φ45
X9(B6/B39)	7.5~30	9~87	7,100	Φ100	Φ50
X10(B7/B45)	15~45	9~87	12,000	Φ110	Φ55
X11(B8/B55)	18.5~55	9~87	20,000	Φ130	Φ70