Zibo hydraulic elevator reducer overload operation

Zibo hydraulic freight elevator reducer overload operation may be caused by the following reasons:

1. Heavy load: The weight of the cargo carried by the hydraulic freight elevator in the lifting process exceeds the bearing capacity of the reducer, resulting in overload operation of the reducer.

2. Insufficient lubrication: the internal lubrication of the reducer is insufficient or the lubricating oil quality is not good, resulting in increased resistance of the reducer, reduced work efficiency, and easy overload during operation.

3. Equipment aging: the reducer is used for a long time, the internal parts are easy to lose, resulting in increased resistance during operation, resulting in overload of the reducer.

To solve the above problems, the following measures can be taken:

1. Control the weight of the cargo to ensure that the hydraulic cargo elevator operates within the normal load range.

2. According to the use of the reducer, replace the lubricating oil regularly, and ensure that the quality of the lubricating oil meets the requirements.

3. Maintain the reducer regularly and replace the aging parts to ensure the normal operation of the reducer. When using a hydraulic freight elevator, attention should be paid to the weight of the cargo and the load capacity of the freight elevator, and regular maintenance and inspection of the equipment should be carried out to ensure the safe and reliable operation of the equipment.